Have you ever cleaned your LED screen before? LED screens need regular cleaning, if you want to use the device in the best way possible. How to clean LED screens? It’s a simple process anyone can follow. 

Many walk on eggshells for fear of damaging their LED displays as they clean them. Others simply hire someone to do cleaning to avoid making a mistake. However, if you’re up to the challenge, you can do the cleaning on your own and save a lot of money too. 

To help you achieve this goal, let’s discuss all the aspects you have to know to properly and effectively clean your LED screens. 

Signs that Says Your LED Screen Needs Cleaning

More than learning how to clean LED screens, you also need to know the right time when a cleaning is needed. Before you take your LED screen for a thorough scrubbing, you should know which specific signs to look for. 

LED displays are supposed to show high-quality and vibrant images and one thing that can make them perform poorly is when they need cleaning. Dust and dirt start to build up on the screen. All these elements hinder the device from performing at its best. So, before that happens, look at the following signs that will tell you your screen needs cleaning today. These factors will tell you when you need to learn how to clean LED screens as soon as possible.

• Dull Appearance – If your screen appears less bright and saturated, it needs cleaning
• Smudges and Streaks – Check the surface of the display for stains in the forms of streaks and smudges
• Dark Areas – You might notice darker areas on the screen, which are often found at the center of the display or in the outermost lines of the screen acting like a dark border
• Glaring Spots – Besides dark spot at the center, you might also notice glares in the middle of the screen when you look at it at an angle
• Poor Image Quality – Whatever’s shown on the screen is noticeably blurry or the image is distorted
• Hot Screen – Since there’s dirt and dust buildup on the device’s vents and cooling fans, they are not functioning well, leading the screen to feel hot and even overheat at the worst

How to Clean LED Screens: Items You Need

Once you’ve confirmed that your LED display needs cleaning, one of the first steps to do is to gather all the items you will need for the task. The best thing about the supplies you need for LED screen cleaning is that they are easy to find in your local market. These are some of the supplies to gather:

Microfiber Cloth

One of the basic items you’ll need for this task is a cleaning cloth and nothing works better than a microfiber cloth. These clothes are popular for its thin and soft texture, which makes sure that you won’t make marks on the surface of the screen. They also have great absorption power, especially when it comes to dirt and dust. You can wipe them on the display without causing damage to the surface, including scratches and streaks. 

If you can’t find microfiber cloth anywhere, these are some of the other options you can consider:

• Cotton handkerchiefs
• Cotton towels
• Lint-free woven clothes

Cleaning Solution

The cleaning solution can be homemade or you can purchase a prepared solution from the market. However, you can’t just buy any cleaning solution you see on the shelves. You can directly look for LED display cleaning solutions but if you can’t find one, just mix water with either one of the following:

• LED cleaning agents
• Ammonia-free cleaning agents

Brush

In addition to microfiber cloth, a soft-bristle brush can also be used to clear the screen from dust, dirt, and other particles. Just make sure that it has soft and not stiff bristles to make sure you won’t cause scratches on your display. 

Blow Dryer

Blow dryers can be used for instant drying of the surface of your LED display, besides using your cleaning cloth to wipe the cleaning solution away.

Vacuum Cleaner

For your LED screen’s vents and fans blocked with dust particles, a vacuum cleaner can easily unclog them. Whether the buildup is light or severe, the vacuum cleaner can do the job well and blow away all the unwanted particles to help your display cool down again when in operation.

How to Clean LED Screens: Basic Steps

Now that you’ve gathered all the items you need for this task, it’s time to get your hands dirty and start cleaning your display. Here are the simple steps you can follow: 

Step 1: Prepare the Screen

The first step in this how to clean LED screens process is to turn the screen off and unplug it. Allow the entire device to cool down first before you start cleaning the display. Electricity can also hinder your cleaning routine since it easily dissipates dust particles that may just return after completing your task. 

This will make sure that you won’t get electrocuted while cleaning the screen. It will also make sure that there won’t be new problems like short circuits. 

Step 2: Dry Cleaning

Get a clean and dry microfiber and gently wipe the surface of your LED display. Wipe the screen in a circular motion to completely cover the device. 

In this step of your how to clean LED screens process, you can use a soft-bristle brush to get rid of dust and dirt particles on the surface of the screen. Start brushing either vertically or horizontally (just choose one) to avoid messing up the LED pixels of the modules. Once you’re done brushing, turn the vacuum cleaner on to get rid of the dirt scrubbed off from the device. 

Step 3: Wet Cleaning

Wet cleaning is one of the most crucial steps in this how to clean LED screens process. Get another microfiber cloth and spray a bit of the cleaning solution you bought or personally prepared. You can also dip the cloth in the solution but make sure that the liquid is just right and not to the point that it’s sopping wet. If you have too much of the solution, simply wring out the cloth to get rid of some of the liquid.

Gently wipe the cloth along the surface of your LED screen. Pay attention to areas with thicker and more dirt buildup. You can easily identify them when you see smudges and uneven surfaces. Spray and wipe until you cover the entire device and you’re satisfied you’ve cleaned everything.

Step 4: Drying

When you’re done wiping, take out your blow dryer to start drying the surface of the display. While you can just wait for it to dry, using a blow dryer will hasten the process. 

If the weather is cold or humid, using a blow dryer is better than just waiting for it to dry. You might have to wait for a long time if you do so. However, make sure you control the strength of the wind you use for you might cause damage to the screen. 

Step 5: Vacuum Fans & Vents

Finally, locate the vents and fans of your LED screen and pay attention to the dirt buildup on them. Use your vacuum cleaner to take out all the particles hindering your screen’s cooling process. 

How to Clean LED Screens: 5 Practical Tips

After learning how to clean LED screens, here are some of the practical hacks you need to bear in mind to effectively accomplish your task. 

1. Stay away from ammonia 

With so many cleaning solutions you can use, check out the ingredients and never settle for a product with ammonia in it. Rubbing alcohol is also a big no-no. These solutions can take out the protective covering on the screen and actually lead to display discoloration. 

2. Do not directly spray cleaning solution

When you use your cleaning solution, do not spray it all over your screen. Directly applying the liquid to the device can cause internal damage to the module, especially the pixels on the board. Spray the solution on a microfiber cleaning cloth instead and then wipe the screen with it. 

3. Take into account the LED screen’s inner parts

The device’s inner components is one of the most overlooked step in this how to clean LED screens process. Do not forget to consider the internal components of your LED display. Since modules often have gaps, dirt and dust buildup can still occur in the internal body of your screen. Use a vacuum cleaner to work on these particles and take them out of your device.

4. Avoid hard touch on the screen 

Avoid pressing down on the LED display when you’re cleaning or even just moving the screen. In this how to clean LED screens process, you will need to rub on the display. While they may be durable, they are not resistant to hard press scrubbing hard on the display may cause more damage rather than help you clean it. That’s why you need to use either a microfiber cloth or a soft-bristle brush and stay away from stiff brushes and scraping tools.

If you work hard on the screen and scrub intensely more than necessary, it will damage your screen’s protective covering and cause more problems in the end. 

5. Use the user’s manual as a guide 

When you have doubts, always go back to the manual that comes with your LED screen. There might be a more specific way of cleaning the display as instructed by the manufacturer. The manual will also help in making sure that you prevent doing irreparable damage to the device. 

When all these tips still won’t work and you don’t have the confidence to work on your LED screen with your own hands, look for LED screen cleaners near you instead. It may cost you something but you can be guaranteed that the kind of cleaning done on the LED display is effective and appropriate. 

Conclusion

Do you know how to clean LED screens? It’s not as complicated as repairing your LED displays and you don’t need any certification or special tool just to keep your screens clean. By regularly maintaining the cleanliness of your LED displays, you can guarantee optimal performance and durability. Besides the advantage of the screen’s operation, its aesthetics and look are also guaranteed to improve.